Product Features:

Sea Swirl Wavemaker ¾"

• 3/4" model is mounted in a 5 1/2" x 3 1/4" x 2 1/2" black plastic box & uses a 4 watt motor
• small 5 watt motor for 3/4" and 1" models are mounted in a 7"x 5"x 2 1/2" black plastic box
• 9 foot electric cord
• 2 viton o-rings seal around a specialty filled pipe for an extremely low coefficient of friction and giving superior lubrication!!!
• motor is ul listed and csa certified
• floating ball joint type linkage is used to connect motor shaft to oscillating pipe
• oscillates 90 degrees every 60 seconds
• 180 degree oscillating capability available on 1/2" and 3/4" models with optional "y" fitting
• o-rings are permanently lubricated with a synthetic Teflon grease
• outer oscillating pipe is machined for standard schedule 40 fittings
• total height with fitting attached on top:
  3/4 inch model - 4 3/4 inches
• flow rates for each model as follows:
   3/4 inch model - 850 gph
• 3/4" model supplied with loc-line on outlet (these are adjustable up or down approx. 30 degree