Aqua Logic Digital Temperature Controller – Single Stage

The Aqua Logic Single Stage Digital Controller will turn on / off heating or chilling equipment, up to 1/2 HP, based on a rise or fall of temperatures.

Overview:

• Programmable in Fahrenheit or Celsius
• Rated for indoor/outdoor use
• The digital display is easy to read and a push button control allows you to choose heating and cooling set points
• A keypad lockout provides tamper-proof protection
• Non-volatile memory retains control settings during power outage
• This is an OEM product for some of the largest industrial chiller & heater manufacturers
• Outperforms other thermostats which cost substantially more
• Input power requirements 115 volts
• Can control heater or chiller of up to 1/2HP or approx. 1,000 watts!
• This device is operable from a distance of up to 400 feet
• NEMA 4x rated water tight enclosure protects internal electrical

Specifications:

• Input voltage = 120 VAC, 50/60 Hz
• Temperature range = -30°F to 220°F
• Differential range = 1°F to 30°F
• Dimensions = 2-5/8″ x 7-1/2″
• Sensor dimensions = 1/2″ diameter x 3-1/2″ length
• RCA connection to sensor cable length = 6`
• Titanium sensor
• 40″ power cords to controller and from controller to heater or chiller

Relay Electrical Ratings:

• Full load amps = 9.8
• Locked rotor amps = 58.8
• Resistive amps = 9.8
• Horsepower = 1/2 HP

Control Ambient Temperature:

• Operation = -27 to 140 (29 to 60)
• Storage = -40 to 176 (-40 to 80)
• Enclosure = NEMA Type 4X Outdoor

Warning as required – This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birthdefects or other reproductive harm. For more information go to www.P65Warnings.ca.gov