Tunze Turbelle Stream Controllable 6105 Pump
The innovative motor based on the eco-energetic concept and newly developed pump technology ensures a very high efficiency with very low maintenance and power consumption.
Very silent operation
Special plastic bearings, a titanium-alloy axle and silicone absorbers enable a very silent run without wear which applies for smaller models as well as for the powerful pump delivering 13,000 l/h. (3,434 USgal./h). Large suction area.
The water which is drawn in passes through a giant intake strainer, and thus prevents premature clogging.
Magnet Holder – a standard feature
As a standard feature, Tunze Turbelle® stream® is supplied with a magnetic holder, which enables uncomplicated attachment at any position on the aquarium pane up to 15 mm (.60 in).
The ball-type design is an intelligent solution for installation with a minimum of hydraulic losses. Contrary to other pumps, they offer a lot of flexibility with respect to positioning and orientation of the water stream, which can be adjusted in such a way that an effective flow is produced over a long distance in the aquarium at lower power consumption.
The Turbelle stream 6105 and 6155 pumps have been fitted with electronic speed controllers running on safety extra-low voltage. They are ideal for wave or tide simulation in every aquarium and contain a new “intelligent” microprocessor-controlled motor. Turbelle Electronic Controller Included.
No problem in case of power failure
Fitted with Safety Connector 6105.50, Turbelle® stream 6105 and 6155can be operated on every 10 V to 24 V direct-current source (battery, solar cell). The safety connector permits normal operation with the TUNZE® power supply unit, but in case of a power failure it will automatically switch over to a direct-current source.
- For aquariums from 200 to 2,000 litres (50 to 525 USgal.)
- Flow rate: 3,000 up to abt. 13,000l/h (700 to abt. 3,400 USgal./h) – 24V with Turbelle® Controller
- Energy consumption: max. 35W – 24V
- Power supply unit: 100-240V / 50-60Hz
- Cable length: 5m (196.8 in.)
- Dimensions: diam. 90mm (3.5 in.),
- Output: diam. 50mm (1.96 / 2.48 in.)
- Magnet Holder up to a glass thickness of 15mm (1/2″)
- Additional WIDE FLOW propeller housing Ejection: diam. 63mm (2.48 in.)